Leeson SM-Plus Series Sub-Micro Inverters Manual do Utilizador descarregar pdf (Página 34)

FACTORY

NO. PARAMETER NAME RANGE OF ADJUSTMENT DEFAULT

(NOTE 1)

27 BASE FREQUENCY 25.0 - 500.0 Hz (NOTE 4) 60.0 Hz

28 FIXED BOOST 0.0 - 30.0 % 1.0 %

29 ACCEL BOOST 0.0 - 20.0 % 0.0 %

30 SLIP COMPENSATION 0.0 - 5.0 % 0.0 %

31-37 PRESET SPEEDS 0.0 - MAXIMUM FREQUENCY 0.0 Hz

38 SKIP BANDWIDTH 0.0 - 10.0 Hz 0.0 Hz

39 SPEED SCALING 0.0 - 6500.0 0.0

40 FREQUENCY SCALING 3.0 -2 000.0 Hz 60.0 Hz

41 LOAD SCALING 10 - 200 % 200 %

42 ACCEL / DECEL #2 0.1 - 3600.0 SEC 20.0 SEC

43 SERIAL ADDRESS 1 - 247 1

44 PASSWORD 000 - 999 225

47 CLEAR HISTORY MAINTAIN (01), CLEAR (02) MAINTAIN (01)

48 PROGRAM USER SETTINGS (01), OEM SETTINGS (02), USER

SELECTION RESET OEM (03), RESET 60 (04), SETTINGS (01)

RESET 50 (05), TRANSLATE (06)

50 FAULT HISTORY (VIEW - ONLY) (N/A)

51 SOFTWARE CODE (VIEW - ONLY) (N/A)

52 DC BUS VOLTAGE (VIEW - ONLY) (N/A)

53 MOTOR VOLTAGE (VIEW - ONLY) (N/A)

54 LOAD (VIEW - ONLY) (N/A)

55 0 - 10 VDC INPUT (VIEW - ONLY) (N/A)

56 4-20 mA INPUT (VIEW - ONLY) (N/A)

57 TB STRIP STATUS (VIEW - ONLY) (N/A)

58 KEYPAD STATUS (VIEW - ONLY) (N/A)

59 TB-30 OUTPUT (VIEW - ONLY) (N/A)

60 TB-31 OUTPUT (VIEW - ONLY) (N/A)

NOTE 1: Factory defaults are shown for a 60 Hz base frequency. See Parameter 48 for 50 Hz base

frequency.

NOTE 4: Maximum setting is 1300.0 Hz (factory default is 999.9) on drives with High Output

Frequency option. Consult the factory.

PARAMETER MENU (cont)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 65 66

Sem comentários

Leeson SM-Plus Series Sub-Micro Inverters Manual do Utilizador Página 34