Leeson Chassis Mount PWM Control: M1740009.00 Manual do Utilizador descarregar pdf (Página 13)

7Installation

Quick-connect terminal block

The quick-connect terminal block has an 8-pin header block

and 8-screw terminal plug (Figure 4). To use the quick-

connect terminal block:

1. Carefully pull the terminal plug from the header block.

2. With a small flat-head screwdriver, turn the terminal plug

screw counterclockwise to open the wire clamp.

3. Insert a stripped wire into the large opening in front of

the plug.

4. Turn the terminal plug screw clockwise to clamp the

wire.

5. Repeat steps 2 through 4 for each terminal until all

connections are made.

6. Insert the plug into the header until securely fastened.

HEADER

BLOCK

TERMINAL

PLUG

Figure 4. Quick-Connect Terminal Block

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Sem comentários

Leeson Chassis Mount PWM Control: M1740009.00 Manual do Utilizador Página 13